By David Talbot

Investments in energy start-ups can count as charitable grants. Could this funding approach help get new technologies to market?

Kevin Bullis

Just a few years ago, the conference rooms of the Marriott Hotel in Kendall Square, just across the street from MIT, were abuzz with venture capitalists who were going to solve climate change by funding startups with novel solar cell and biofuel technologies. I remember John Doerr, of Kleiner Perkins, tearing up as he talked about the importance of investing in technology to stop global warming.

Those same conference rooms were far more staid this year, at the annual MIT Venture Capital conference. Indeed, energy startups were talked about as charity cases. Literally.

In the last couple of years, funding for new energy companies has dried up or has shifted to companies with more modest goals, such as crunching data to cut energy bills. VCs got burned after several solar companies and advanced battery companies went bankrupt or were acquired for pennies on the dollar (see “For Energy Startups, a Glass Half Full or Empty?” and “A123 Systems Files for Bankruptcy”).

At the conference I learned that the Will and Jada Smith Foundation, along with four other foundations, are funding an effort to develop a new way for energy startups to get funded—by treating them as charities that no ordinary investor would touch.

As it turns out, there’s a provision in the tax code that says that investments in startups can be counted as charitable grants—even if those investments could in the long term bring in huge returns. The catch? The startups have to be ones that are too risky for ordinary investors.

That’s an increasingly easy requirement to meet for many energy companies these days. VCs are wary of energy startups that require large investments, and will take over a decade to provide returns.

Private foundations, however, don’t mind waiting around for returns. Indeed, they’re used to giving away a lot of their money.

In the United States, tax-exempt private foundations make grants totaling $50 billion a year—that could go a long way to helping energy startups. The donations are part of a requirement that such foundations donate at least five percent of their money to charitable causes. The Smiths’ foundation is providing seed money for a new organization—called PRIME—that is helping private foundations take advantage of a part of the tax code that will allow them make investments in startups, but count them as grants that help them meet that five percent requirement.

According to Sarah Kearney, the executive director of PRIME, private foundations can make investments, and even make big returns on those investments, and still count them as charitable grants as long as they meet two requirements. The first is that the startup serves a philanthropic role. “Advancing science” counts an philanthropy. Addressing climate change and helping poor countries with their energy needs could also count. The second requirement is that ordinary investors wouldn’t touch the startup.

Private foundations don’t often take advantage of this opportunity. One reason is that the team of people in charge of grant making don’t know how to make investments. Another is that there is some risk that the IRS won’t accept the rationale that the investment fits the requirements for being counted as a grant, and getting a confirmation from the IRS can take a year, Kearney says, a long time for a struggling startup to wait for funding.

PRIME is designed to act as an intermediary that takes on that risk, and that has the necessary expertise to make investments. It is registering as a charitable organization with the IRS, so foundations can make ordinary grants to it that they know will count toward that five percent requirement. PRIME will then invest that money in startups that its experts determine count as charities. The organization is at a very early stage, having raised just $180,000 in seed money to get going. It’s in the process of raising funds for its first investments. Much of the early work is being done as “in-kind donations” by energy VCs who want to see more money going to risky energy companies.

Matthew Nordan, a vice president at the venture firm Venrock, is one of the most upbeat energy-related venture capitalists you can find these days (see “A Solar Survivor Has High Hopes”), is one of those VCs. He makes the point that energy is still a huge market, and fortunes are waiting to be made. But he sees the need for new funding models for risky companies. He singled out PRIME as having one of the most promising.

PRIME’s approach is certainly an interesting model, and one that sounds like it could get more funding flowing to energy companies. But ironically, by revealing these companies as being in need of charity, it also highlights just how difficult it is to bring new energy technologies to market, and how hard it is these days to get ordinary investors interested.

The wires that ferry electronic data across microchips are too power hungry for future microchips. But photons can now do the job instead thanks to a new generation of ultralow power optical interconnects.

Emerging Technology From the arXiv

Moore’s law is the observation that the number of transistors on integrated circuits doubles every two years or so. When Gordon Moore spelt out his eponymous law in 1965, the numbers involved were measured in thousands. Today, microchips contain billions of transistors, with the smallest having dimensions just a few nanometres wide.

All that makes for fantastically fast processing at huge data rates. But there’s another increasingly important factor in chip design: power consumption. Not only must the transistors themselves operate at low power but the power consumed in transmitting the data from one pat of a chip to another must also be low.

And therein lies a serious problem. An interconnecting wire on a chip just 1 millimetre long consumes about 100 femtoJoules for every bit it carries. That may sound small–a femtoJoule is 10^-15 Joules. But with data rates now hitting petabits per second (1 petabit = 10^15 bits), a large chip will eat about 100 Watts. And that’s just for the interconnecting wires. The power that transistors use up is on top of this.

The bottom line is that conventional interconnecting wires are at least ten times more power hungry than the next generation of chips can handle.

So the designers of future chips are turning from electrons to photons to do this job. The idea is to convert the electronic signals from transistors into photons and beam them around the chip at ultralow power.

That requires lasers to create the photons, modulators to encode the photons with data and detectors to receive the photons. But here’s the thing: all this has to be done with a power budget measured in just a few femtoJoules, something that hasn’t been possible.

Until now. Today Michael Watts and pals at the Massachusetts Institute of Technology in Cambridge say they’ve designed and built the first photonic modulator that operates at this ultralow power level. “We propose, demonstrate, and characterize the first modulator to achieve simultaneous high-speed (25 Gigabits per second), low voltage (0.5 peak-to-peak Voltage) and efficient 1 femtoJoule per bit error-free operation,” they say.

The new device is a hollow silicon cylinder that acts as a cavity for trapping light waves. It modulates this light thanks to a phenomenon known as the electro-optic effect in which the refractive index of silicon can be changed by modifying the voltage across it.

The modulator solves a number of problems that electronics engineers have been wrestling with. First, it is entirely compatible with the CMOS (complementary metal oxide semiconductor) process used for manufacturing chips and so can be made inside any existing fabrication plant. Previous attempts to make devices of this kind relied on indium which is not compatible with CMOS.

Next, the device is unaffected by the kind of temperature changes that occur in a chip. That’s been a problem for previous modulators of this type since their critical dimensions, and therefore the control they have over light, have always changed with temperature.

Watt and co fix this by exploiting the fact that the electro-optic effect is also temperature dependent. In the new design, this cancels out any changes in dimension ensuring that a temperature change has no overall effect.

And finally, they’ve got all this working with a measly 1 femtoJoule power budget.

Impressive stuff. Watt and co are justifiably pleased with the result. “The results represent a new paradigm in modulator development,” they say.

At the very least, it should make possible a new generation of powerful chips operating at lower power than ever before.

Novel modes of interaction are inspiring independent games companies to come up with completely new types of games.

By Simon Parkin

The cliché is that technological innovation in video game development is the domain of the blockbuster studios. These are companies with the requisite manpower and cash reserves to explore new ways for players to interact with digital games, or to ever more closely replicate the detail and texture of reality on screen. The indie developers, meanwhile, innovate in the area of game design, where they are small and agile enough to take creative risks.

There is some truth to this, and the interplay of technological progress and creativity between the two loose groups has produced a healthy ecosystem. Technological innovations made by the blockbuster developers are passed on to indie devs, while new forms of gameplay uncovered by the indies routinely make their way into the mainstream big-budget releases.

But in 2013 many indie devs have shown their willingness to work with emerging technologies, discovering new ways to interact with games. Indie developers in particular are exploring the new design territory opened by Oculus Rift, the virtual reality headset due for public release next year (see “Can Oculus Rift Turn Virtual Wonder into Commercial Reality?”). These studios are uncovering new types and styles of play that are uniquely suited to the hardware. Here are some of the most interesting examples of technological invention in recent indie games.

Johann Sebastian Joust (PC, PlayStation 3)

J.S. Joust is the brainchild of academic and designer Douglas Wilson. Designed for anywhere from two to seven players, the game is played away from a TV screen and uses the PlayStation Move controllers—Sony’s wand-like batons that have a ping-pong ball-size light at one end. Each player attempts to jolt an opponent’s controller while keeping his or hers steady. If a controller moves too rapidly, the light turns red and its holder is out of the game. The aim is to be the last player standing.

During play music from Johann Sebastian Bach’s Brandenburg concertos is played at a greatly slowed tempo. At regular intervals the music’s speed increases, signalling that the controller’s sensitivity to movement has been decreased, allowing for more vigorous action and interplay between players. A staple of indie game gatherings in beta version since 2012, J.S. Joust is a parlor game that breaks down social barriers by encouraging physical contact—and without a TV screen as a focal point, it allows for thrilling eye contact between players.

The game was slated for commercial release this fall on PC and PlayStation 3 as part of the Sports Friends compendium, but it has yet to surface.

Spin the Bottle: Bumpie’s Party (Wii-U)

Another game that eschews the TV screen, Spin the Bottle: Bumpie’s Party is an indie game for Nintendo’s next-generation console system, Wii-U. Players compete in teams across a variety of riotously creative mini-games, which use a combination of Nintendo Wii’s motion controllers and the Wii-U tablet-like touch-screen interface.

In one of the included games, Rabbit Hunt, players split into two teams. One group leaves the room while the other must hide the Wii remote controllers as best they can, trying to confound the expectations of the opposing team. The other team is then invited back into the room and has a minute or so to find the remotes, which intermittently make the sound of a snuffling rabbit.

As with J.S. Joust, this game transforms the room in which the game is played into part of the set; the mundane contours of a living space are made into an actualized video game level, where routine objects become potential treacherous concealers of tiny rabbits. It’s an inspiring demonstration of how video game hardware can be used in creative ways that the original designers never intended.

DropChord (PC/Mac, iOS, Android, Ouya)

Created by DoubleFine, the studio best known for humorous, narrative-led games (such as Psychonauts, Sesame Street: Once Upon a Monster, and Brütal Legend), DropChord is an abstract music game for tablets that also offers one of the best uses of the Leap Controller, a computer hardware sensor device that supports hand and finger motions as input (see “Leaping Into the Gesture-Control Era”).

The game’s rules are simple: hold two thumbs to the screen and light streaks between them, joining to create a throbbing beam that bisects the darkness. During play you must position the beam in order to strike through the “notes” that appear within the circle. Peril is introduced by way of “scratches,” red dots that you must avoid touching with your beam. Strike all of the notes in a section without a scratch to score a perfect pattern. Your successful swipes trigger firework explosions that light up the screen with light and particles.

While Sony and Microsoft continue to pursue motion-controlled games (the latter’s Kinect 2.0 camera, launched alongside the Xbox One last month, is a particularly powerful piece of hardware), players still view these games with suspicion. DropChord is a rare example of a game that is best suited to motion control play, and demonstrates the powerful potential of this form of interaction where most others have failed.

Private Eye (PC & Oculus Rift)

In this striking detective game for the Oculus Rift virtual reality headset, you play as a wheelchair-bound detective spying on a building through his binoculars. Clearly influenced by Alfred Hitchcock’s Rear Window, Private Eye re-creates the sense of being a largely helpless voyeur with style.

Your only interaction with the game world is via head movements. By surveying the scene and catching important details you must work to solve the mysteries of the neighborhood, from finding a lost football for a group of children to uncovering the local Mafia’s plans.

The ultimate goal, however, is to catch a murderer who you know will kill at 10 p.m. It is a wonderful and inspiring exploration of the power of the new hardware.

Tenya Wanya Teens (PC)

Eccentric auteur Keita Takahashi is best known for his surreal PlayStation series Katamari Damacy, in which players play as an alien prince who rolls a sticky ball through the world, picking up modern living’s detritus as he goes. Tenya Wanya Teens is an equally unconventional proposition, a party game in which two players race to be the first to perform a range of random on-screen actions, from shouting “I love you” at a pretty girl, to successfully peeing into a urinal.

The technological invention comes from the game’s two giant 16-button controllers. Each of the game’s on-screen actions is tied to a different color button (so, for example, you might need to press a red button to order your character to brush his teeth in front of a bathroom mirror).

Humor derives from the fact that the colors of the buttons change at random (via in-button lighting), fooling your brain into pressing the wrong button at the most inopportune moments. In this way you may accidentally cause your character to tell a urinal that he desperately loves it, or pee on a bear. Hilarious and memorable, even if, thanks to the bespoke hardware required, it is scarce at the moment.

Escape wasn’t the first game to be announced for Google Glass, the wearable computer due for release next year, but it was the first to be completed and released (albeit only to those few who own development kits).

A far cry from the real-world first-person shooters that some video-game makers have envisioned, Escape is a simple puzzle game that plays out on the surface of one of the device’s lenses. In the game you guide a stick character around a path of dots; it’s the kind of game you’d expect to idly play on your browser to while away the time, but the Google Glass context elevates it to a new level of interest, and the reception to the game demonstrates consumers’ hunger for new game experiences on emerging wearable hardware.

The fifth generation of mobile communications technology will see the end of the “cell” as the fundamental building block of communication networks.

It may seem as if the fourth generation of mobile communications technology has only just hit the airwaves. But so-called 4G technology has been around in various guises since 2006 and is now widely available in metropolitan areas of the US, Europe and Asia.

It’s no surprise then that communications specialists are beginning to think about the next revolution. So what will 5G bring us?

Today we get some interesting speculation from Federico Boccardi at Alcatel-Lucent’s Bell Labs and a number of pals. These guys have focused on the technologies that are most likely to have a disruptive impact on the next generation of communications tech. And they’ve pinpointed emerging technologies that will force us to rethink the nature of networks and the way devices use them.

The first disruptive technology these guys have fingered will change the idea that radio networks must be made up of “cells” centered on a base station. In current networks, a phone connects to the network by establishing an uplink and a downlink with the local base station.

That looks likely to change. For example, an increasingly likely possibility is that 5G networks will rely on a number of different frequency bands that carry information at different rates and have wildly different propagation characteristics.

So a device might use one band as an uplink at a high rate and another band to downlink at a low rate or vice versa. In other words, the network will change according to a device’s data demands at that instant.

At the same time, new classes of devices are emerging that communicate only with other devices: sensors sending data to a server, for example. These devices will have the ability to decide when and how to send the data most efficiently. That changes the network from a cell-centric one to a device-centric one.

“Our vision is that the cell-centric architecture should evolve into a device-centric one: a given device (human or machine) should be able to communicate by exchanging multiple information flows through several possible sets of heterogeneous nodes,” say Boccardi and co.

Another new technology will involve using millimetre wave transmissions, in addition to the microwave transmission currently in use. Boccardi and co say that the microwave real estate comes at a huge premium. There is only about 600MHz of it. And even though the switch from analogue to digital TV is freeing up some more of the spectrum, it is relatively little, about 80MHz, and comes at a huge price.

So it’s natural to look at the longer wavelengths and higher frequencies of millimetre wave transmissions ranging from 3 to 300 GHz. This should provide orders of magnitude increases in bandwidth.

But it won’t be entirely smooth going. The main problem with these frequencies is their propagation characteristics—the signals are easily blocked by buildings, heavy weather and even by people themselves as they move between the device and the transmitter.

But it should be possible to mitigate most problems using advanced transmission technologies, such as directional antennas that switch in real time as signals become blocked. “Propagation is not an insurmountable challenge,” they say.

Next is the rapidly developing multiple input-multiple output or MIMO technology. Base stations will be equipped with multiple antennas that transmit many signals at the same time. What’s more, a device may have multiple antennas to pick up and transmit several signals at once. This dramatically improves the efficiency with which a network can exploit its frequencies.

However, it will mean larger antennas, perhaps spread out across the surface of skyscrapers. That’s fine in modern cities with plenty of surface area that is relatively easily accessible. It’d be harder to manage in older cities where large panels will be harder to conceal.

Smarter devices should also help shape the networks of the future. So instead of signals being routed by the base station, smart devices will do this job instead, choosing between a variety of different options. For modern smartphones, that should be a relatively straightforward task.

And the final disruptive technology these guys identify is the ability for devices to communicate with each other without using the network at all.  Boccardi and co say this will be essential for the ways in which future networks will be used. For example, a sensor network may have ten thousand devices transmitting temperature data. That will be easier if they can send it from one device to the next rather than through a single base station.

Of course, many of these developments pose significant technology challenges but none of these should be showstoppers. “New research directions will lead to fundamental changes in the design of future 5G cellular networks,” say Boccardi and co confidently.

5G is not a question of if but when.

IBM researchers have developed a new polymer-like material to treat fungal infections.

By Susan Young

A material made from plastic bottles can knock out a drug-resistant fungal infection that the Centers for Disease Control and Prevention predicts will become a more serious health problem in coming years.

Antibiotic-resistant bacteria and fungi kill at least23,000 people in the U.S. alone each year, and many  of these microbial infections are acquired by people hospitalized for other reasons. Research groups around the world are exploring a variety of ways to address the problem, including hunting for novel kinds of antibiotics (see “Bacteria Battle Generates New Antibiotics”) and creating sutures coated with bacteria-killing viruses (see “Using Viruses to Kill Bacteria”).

Another approach involves using biologically active materials that punch holes in the membranes surrounding each microbial cell. These membrane-attacking compounds mimic one of the body’s natural defenses—antimicrobial peptides that insert themselves into a microbe’s outer membrane and break open the bug. IBM Research has developed such a compound—a small molecule that self-assembles into a polymer-like complex capable of killing Candida albicans fungi infecting the eyes of mice. The work was published today in Nature Communications.

“Usually, it is difficult to make antifungal agents because fungal cells are very similar to human cells,” says Kenichi Kuroda, a materials chemist at the University of Michigan who is also working on antimicrobial materials. The challenge is that many microbe-killing drugs work by sabotaging a molecular process inside the pathogen’s cells. And while the molecular machinery of bacteria is usually sufficiently distinct from human cellular machinery to avoid overlapping effects, fungal cells are much closer.

The new IBM compound has not yet been tested in humans, but the researchers say that in mice with a Candida infection in their eyes, the compound killed the fungus more effectively than a widely used antifungal drug without causing harm. And whereas Candida developed resistance to an existing antifungal drug after six treatments, it did not develop resistance to the new compound even after 11 treatments, the team reports.

That ability to avoid resistance may be thanks to the fact that the compound kills by disrupting the microbes’ outer membrane. Unlike antibiotics, which typically work slower and therefore enable a population of bacteria to evolve resistance to a drug’s function, “these kinds of biomaterials have a quick action,” says Kuroda, whose is also focusing on attacking microbial membranes.

IBM developed the polymer-like material using techniques that are well-established in microelectronics but relatively new to biology, says James Hedrick, the IBM Research materials scientist leading the work. The compound belongs to a branch of materials sometimes referred to as molecular glasses. The compound starts off as many individual small molecules, but in water, these individual molecules coalesce into a larger structure that is similar to a polymer, but with weaker bonds between each molecule. This means that the material degrades over time.

“With time it’s going to fall apart, and going to pass through the body,” Hedrick says.  “You want them to do their business and then go away, and you don’t want them to accumulate in the body, in waterways, and in our food.”

The starting material comes from a common plastic known as PET. Hedrick says whenever he needs more starting material, he just goes to the nearest recycling bin in the San Jose-based IBM Research building, finds a plastic bottle, and cuts a piece of out of it.

Working with collaborators in Singapore who handle the animal testing branch of the project, Hedrick says a similar compound can knock out an antibiotic-resistant bacterial infection known as MRSA. By injecting that compound into the tail veins of mice, the researchers have been able to clear a MRSA infection from their blood.

“We can do many things with [these compounds],” says Hedrick. “We can make them into hydrogels to treat MRSA skin infections and they can go into everything from shampoo to mouthwash.”

SolarCity’s new battery system might help solar become a significant source of electricity.

By Kevin Bullis

Today, SolarCity—a company that’s grown quickly by installing solar panels for free and charging customers for the solar power—announced a new business that will extend that model to providing batteries for free, too. SolarCity is a rare success story for investors in clean technology, and its business model has sped the adoption of solar panels.

The batteries could help businesses lower their utility bills by reducing the amount of power they draw from the grid. They could also help address solar power’s intermittency, which could prevent it from becoming a significant source of electricity. The batteries are being supplied by Tesla Motors, whose CEO, Elon Musk, is SolarCity’s chairman.

Other solar companies have failed in recent years. But SolarCity’s business model has helped it grow quickly. It had a successful IPO a year ago, and its stock price has risen from its IPO price of $8 to over $50 today (see “SolarCity IPO Tests Business Model Innovations in Energy”).

CEO Lyndon Rive says that eight years from now, the company might not be able to continue selling solar panel systems unless it packages them with batteries, because of the strain on the grid that solar power can cause. “It could be that, without storage, you won’t be able to connect solar systems to the grid,” he says.

Solar power intermittency isn’t currently a big problem for utilities, since solar panels generate just a tiny fraction of the total electricity supply. But solar power will become a strain on the power grid as it grows. Power from solar panels can drop in less than a second as clouds pass overhead, before surging back again just as fast. The tools that utilities use now to match supply and demand typically can’t respond that fast. Batteries could be a solution, but they’re too expensive to be used widely now. Rive thinks SolarCity can help drive down their costs by scaling up its use of batteries with the new business model.

Utilities charge companies for their electricity based on two things. The first is the total amount of electricity they use (measured in kilowatt-hours). The second has to do with their peak demand—a company that needs to draw huge amounts of power for industrial equipment will pay more than one that only needs to charge a couple of laptops, since it will need bigger transformers and other equipment. The fee based on that peak electricity demand can be a big chunk of the total bill, typically between 20 and 60 percent, Rive says.

The battery systems—and the software that controls them—are designed to reduce the peak draw from the grid. Batteries charge up using power from solar panels and supplement with power from the grid when a company needs to draw its highest levels of power—such as during summer afternoons, when air conditioners are running hard.

SolarCity is also testing battery systems with residential customers, who typically don’t pay demand charges. The main draw for homeowners would be the batteries’ ability  to provide backup power if the grid fails. But eventually regulators could adopt rules that allow homeowners to reap profits from allowing utilities to use their batteries to help manage electricity load on the grid.

Rive says SolarCity spent three and a half years developing the battery system and the last year testing it. Because batteries are expensive, it’s ideal to use ones as small as possible. Algorithms try to predict when to charge and discharge the batteries, a decision based partly on forecasts of how much solar power is going to be available and when demand will be greatest.

The batteries use the same technology Tesla uses in its electric cars. But the size of the packs could be far larger, depending on the size of the solar panel system it’s paired with.

SolarCity isn’t the only company looking to use batteries to reduce electricity costs (see “A Startup’s Smart Batteries Reduce Buildings’ Electricity Bills”).Nissan recently announced that it had used the batteries inside several plugged-in Nissan Leaf electric vehicles to reduce electricity costs for one building in Japan, as part of a test of a concept called vehicle to grid (see “Recharging the Grid with Electric Cars”).

Street View-style imagery of interior spaces lets mobile devices locate themselves more accurately than is possible with GPS.

By Tom Simonite on December 10, 2013

Smartphones locate themselves outdoors using a GPS sensor, but those signals are blocked indoors. A new technique uses a device’s camera to get an indoor location fix to an accuracy of within a meter. The technique could enable new kinds of apps, and may be particularly valuable for wearable computers such as Google Glass.

The new location-fixing method is being developed at the University California, Berkeley. It uses a photo from a device’s camera to work out the location and orientation of the device. It does this by matching the photo against a database of panoramic imagery of a building’s interior, similar to the outside views offered by Google’s Street View. The system can deduce the device’s location because it knows the position of every image in that database.

The researchers used a special backpack that captures Street View-style imagery indoors as the wearer carries it around. It has two fisheye cameras, laser scanners, and other sensors. Software uses the data collected to generate a map of the building’s interior, a stitched-together set of panoramas, and a database of individual images that can be used for location lookups.

“You can provide that blue dot you see on a mobile map when out-of-doors for interiors,” says Avideh Zakhor, who leads the Berkeley group developing the system. Zakhor previously sold a 3-D city mapping company to Google that became a major part of the company’s Google Earth 3-D virtual globe.

Zakhor and colleagues have tested their system in buildings on the Berkeley campus and in a mall in Fremont, California. In tests at the mall, they successfully matched more than 96 percent of images taken by a smartphone’s camera against the database of images. When the matches were turned into location fixes, most came out with an error of less than a meter from the device’s true location.

Zakhor says her approach compares favorably with competing methods of determining location indoors in terms of accuracy and the cost of deployment. Alternative methods include using Bluetooth “beacons” or fingerprinting the pattern of Wi-Fi signals inside a building.

Jonathan Ventura, senior researcher at Graz University of Technology, Austria, agrees. “The major advantage of image-based localization is that it works almost everywhere and doesn’t require changing the environment in any way,” he says.

Zakhor’s group isn’t the only one capturing such data: Google has begun taking its Street View product inside and announced last month that it had documented the interiors of 16 airports and over 50 train stations.

Ventura’s own research focuses on augmented reality. He says that if devices can be located very accurately it will allow for virtual and real worlds to be closely aligned. “If we want to render a rich and complex virtual world into a high-resolution image,” he says, “we need to have much more accurate positioning than a consumer GPS receiver can deliver.”

Zakhor is planning tests of her method on computerized glasses, with the intention of having the devices use snapshots to track their location, making it possible to provide a map of an interior space in a person’s field of vision. The Berkeley research group is also working on using data from Wi-Fi signals collected by their backpack to provide a secondary method of deducing a device’s indoor location.

An industry hopes to make Web-connected gadgets from different makers work well together.

Before you know it, you may be able to connect your “smart” coffeemaker to your “smart” toaster to ensure a properly timed java and bagel.

A group of over 20 tech companies including LG, Panasonic, Qualcomm, HTC, and Sharp has joined forces with the Linux Foundation in hopes of spurring the development of Internet-connected devices that work together regardless of their manufacturer. The Linux Foundation, a nonprofit that supports the spread of the open-source Linux operating system, announced the creation of the nonprofit AllSeen Alliance on Tuesday.

Over the last several years, interest in connecting normally offline devices like toasters, door locks, and cars to the Internet in order to augment their functionality—a trend known as the Internet of Things—has grown sharply. Data from ABI Research estimates that there are already more than 10 billion wirelessly connected devices in use, and by 2020 there will be more than 30 billion.

Yet this ever-growing field of devices operates on many different protocols, or rules used for transmitting data. It is difficult for, say, a connected light switch made by one manufacturer to interact with a connected door lock made by another unless they’re using the same protocol. Microsoft’s Lab of Thingsconnected-device controller software (see “Microsoft Has an Operating System for Your House”) and OpenRemote’s open-source Internet of Things platform (see “Free Software Ties the Internet of Things Together”) are among several attempts to fix this. But none of these efforts has yet gained significant ground.

The AllSeen Alliance hopes to change that by working with well-known names in the consumer electronics industry. The Linux Foundation said these members will contribute software and engineering resources that will go toward building open-source software that lets gadget makers, service providers, and software developers build Internet of Things products and services that can easily work together.

“The challenge and the opportunities presented by the Internet of ‘Everything’ by definition requires collaboration and open-source software among everyone,” said Mike Woster, chief operating officer of the Linux Foundation.

The industry group is basing its software on AllJoyn, the open-source Internet of Things software created by smartphone chip maker Qualcomm. AllJoyn runs on top of numerous computing platforms, including Linux, Google’s Android, Apple’s iOS, and Microsoft’s Windows.

At least one member already has big plans for the software. In a statement, Guodong Xue, the director of the standard and patent department for appliance maker Haier, said his company plans to use software based on AllJoyn across its appliance line. This follows an announcement last week by LG that it intends to add AllJoyn to smart TVs it releases next year.

New catalysts turn carbon dioxide into fuels faster and more efficiently.

By Kevin Bullis on December 4, 2013

Making carbon dioxide by burning hydrocarbons is easy. A pair of novel catalysts recently made by researchers at the University of Illinois could make it far more practical to do the reverse, converting carbon dioxide and water into fuel.

Because running this reaction normally requires large amounts of energy, it has been economical only in rare cases (see “Company Makes CO2 into Liquid Fuel, with Help from a Volcano”). But if the process could be done commercially, liquid fuels could be made from the exhaust gases of fossil-fuel power plants.

The new work, described this week in the journalNature Communications, improves on a pair of catalysts discovered last year that more efficiently turn carbon dioxide into carbon monoxide, which can then be made into gasoline and other products. Those catalysts produce carbon monoxide slowly, however, and one is made of silver, so it’s expensive. But the Illinois researchers have demonstrated that it’s possible to replace the silver with relatively inexpensive carbon fibers while maintaining about the same efficiency. And the technique produces carbon monoxide about 10 times faster.

The work is still in early stages, says Amin Salehi-Khojin, a professor of mechanical engineering at the University of Illinois at Chicago, who led the work. Salehi-Khojin says it will be necessary to produce larger amounts of the catalysts and find a way to incorporate them into a membrane that helps keep them stable over long periods of time—development work that will require industrial partners.

Salehi-Khojin says it may be possible to incorporate the catalysts into an “artificial leaf.” Right now, if the process were to run on sunlight, it would require at least two pieces of equipment: a solar panel to generate electricity, and then a reactor to form the carbon monoxide. A leaf-inspired system would absorb energy from the sun and use it to drive the chemical reactions directly, rather than making electricity first (see “A Greener ‘Artificial Leaf,’” “Sun Catalytix Seeks Second Act with Flow Battery,” and “Artificial Photosynthesis Effort Takes Root”). This approach would make the process more economical.